Protects Mission-Critical Rack-Mounted Equipment
- Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware
- Audible alarm signals loss of utility power, overload and low battery
- 6 NEMA 5-15R outlets
- 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input
- 450-joule surge suppression rating
- Supports half load up to 14 min. and full load up to 4 min.
- Internal batteries designed for hot-swap field replacement
- 2 load banks, each with one outlet controllable remotely to reboot equipment or shed nonessential loads
- Maintains 120V nominal output over input range of 83V-147V without using battery power
- Removes electromagnetic and radio frequency interference that can disrupt or damage equipment's performance
- 99% line mode efficiency saves money and energy and protects the environment
- Compatible with Tripp Lite UPS management cards, such as WEBCARDLX
- USB and DB9 ports enable data-saving unattended shutdown when used with Tripp Lite's PowerAlert software, available via FREE download from www.tripplite.com/poweralert
- EPO port supports emergency shutdown in large facilities
- Hardware included for mounting in 1U of EIA-standard 19 in. 2- or 4-post rack
- Optional 4POSTRAILKIT1U accessory available for extra support in 4-post installations
- Compatible with vertical mount cabinets
- Complies with Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- General Information
- Manufacturer
- Tripp Lite by Eaton
- Manufacturer Website Address
- https://tripplite.eaton.com/
- Brand Name
- Tripp Lite by Eaton
- Product Line
- SmartPro
- Product Type
- Line-interactive UPS
- Warranty
- Limited Warranty
- 2 Year
- Technical Information
- Plug/Connector Type
- NEMA 5-15P
- Receptacle Type
- NEMA 5-15R
- Receptacle Detail
- 6 x NEMA 5-15R
- Protection Type
- Surge
- Black Out
- Brownout
- Over Voltage
- Under Voltage
- EMI / RFI
- Emergency Power OFF
- Yes
- Cord Length
- 10 ft
- Power Description
- Load Capacity (VA)
- 1000 VA
- Load Capacity (Watt)
- 800 W
- Input Voltage
- 120 V AC
- Input Current
- 9 A
- Output Voltage
- 120 V AC
- Waveform Type
- Sine Wave
- Surge Energy Rating
- 450 J
- Management
- Alarm
- Low Battery
- Overload
- Power Failure
- Battery Management
- User replaceable
- Controls/Indicators
- Status Indicators
- Line power status
- Battery power status
- Overload status
- Voltage regulation status
- Battery low/replace status
- Interfaces/Ports
- Serial Port
- Yes
- USB
- Yes
- Battery Information
- Backup/Run Time (Full Load)
- 4 Minute
- Backup/Run Time (Half Load)
- 14 Minute
- Hot Swappable
- Yes
- Environmental Conditions
- Maximum Operating Temperature
- 104°F (40°C)
- Physical Characteristics
- Height
- 1.7"
- Width
- 17.5"
- Depth
- 16.8"
- Rack Height
- 1U
- Form Factor
- Rack/Tower
- Weight (Approximate)
- 32 lb
- Miscellaneous
- Package Contents
- SmartPro SM1000RM1UTAA 1000VA Tower/Rack Mountable UPS
- Mounting hardware
- Cabling for USB & DB9 Monitoring and EPO Switching
- Instruction Manual
- Certifications & Standards
- TAA Compliant
- UL1778 (USA)
- CSA (Canada)
- NOM (Mexico)
- Meets FCC Part 15 Category A (EMI)
- Software Included
- PowerAlert Monitoring
- Country of Origin
- Taiwan
- TAA Compliant
- Yes
- Environmentally Friendly
- Yes
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)