Altronix IP and PoE+ Over Extended Distance UTP or CAT5e

  • Part: 1258764
  • Model: PACE1PTM
$144.00
FREE DELIVERY

Availability

Out of Stock

  • General Information
    • Manufacturer
    • Altronix Corporation
    • Manufacturer Website Address
    • http://www.altronix.com
    • Brand Name
    • Altronix
    • Product Type
    • Network Extender

The Pace1PTM is a long range Ethernet transceiver designed for use with Pace1PRM, Pace4PRM, Pace8PRM and Pace16PRM receivers. They transmit data at 100mbps full duplex and power via a single twisted pair (UTP) (when paired with Pace1PRM) or Cat5e or higher cable in a PoE(+) compliant format. The Pace1PTM will not deliver power to non compliant devices, thus avoiding damage to improperly connected non-PoE cameras/devices. The receiver passes the PoE(+) compliant power over the cable to the Pace1PTM transceiver which in turn passes this power to an enabled IP camera/device. These plug and play units facilitate cost effective solutions for IP devices that need to be installed at distances greater than 100m. They also provide a simple way to replace legacy analog products with new IP devices over single twisted pair (UTP) (when paired with Pace1PRM) or structured cable. Applications:

  • Retrofit digital IP cameras in an analog CCTV CAT5 or UTP installations.
  • Extend Network link distance in an industrial environment.
  • Works with Megapixel, HD720, HD1080 and VGA (SD) cameras. With proper head end equipment.

  • Warranty
    • Limited Warranty
    • Lifetime

  • Technical Information
    • Maximum Extended Range
    • 498.69 ft
    • Maximum Data Transfer Rate
    • 12.50 MB/s
  • Interfaces/Ports
    • Network (RJ-45)
    • Yes
  • Physical Characteristics
    • Height
    • 1"
    • Width
    • 3.5"
    • Depth
    • 3.5"
    • Transmitter Weight (Approximate)
    • 4 oz
  • Miscellaneous
    • Additional Information
    • Input:
      • PoE (15W) IEEE 802.3af compliant or PoE+ (30W)
      • IEEE 802.3at compliant from Pace1PRM, Pace4PRM, Pace8PRM, or Pace16PRM.
      Ethernet:
      • Connectivity: RJ45, auto-crossover.
      • Wire type: 4-pair CAT5e or a single twisted pair UTP.
      • Speed: 10/100BaseT, half/full duplex, auto negotiation.
      • PoE compliant to IEEE 802.3af (15W) and PoE+ compliant to IEEE 802.3at (30W) delivered to camera by Pace1PTM.
      • Throughput is rated to pass 100mbps of data.
      UTP (single twisted pair) from Receiver to Pace1PTM:
      • Distance: up to 152m @ 100mbps.
      CAT5e or Higher from Receiver to Pace1PTM:
      • Distance: up to 500m @ 100mbps.
      LED Indicators:
      • Green - PoE ON (by respective RJ45 jack).
      • Yellow and Green LED IP Link status, 10/100Base-T/active.
      Environmental:
      • Operating Temperature:
      • For 15W: -40° C to 75° C (-40° F to 167° F).
      • For 25W: -40° C to 70° C (-40° F to 158° F).
      • For 30W: -40° C to 60° C (-40° F to 140° F).
      • Storage Temperature:
      • -40° F to 167° F (-40° C to 75° C).
      • Relative humidity: 20 to 85%, non-condensing.
      • Operating Altitude: - 1000 to 6,561.679 ft.
      • (- 304.8 to 2000m).
      Functions:
      • Auto detection and protection of legacy non-PoE cameras/devices.
    • Country of Origin
    • United States
    • NDAA Compliant
    • Yes
    • Environmentally Friendly
    • Yes
    • Environmental Compliance
    • Restriction of Hazardous Substances (RoHS)
Consent Preferences